There is a lardge percentage in casegoods for a hotel ,so as a hospitality furniture manufacturer ,a strict and complete quality control stand is really very important during our production .We can say that quality control is an important part of the hospitality furniture manufacturing process. From design, to implementation, to maintenance. Without quality control, there is no guarantee a product will meet quality requirements.

What is Quality Control for our Hospitality Furniture -casegoods ? Let me introduce our quality control standard from below four elements ,take hyatt house as an example.

A-Specification & deminsion

Need use the approved shop drawing ,if have any update during the production ,must update the shop drawing in time;

Color if match the approved stain sample ;Overall color must match the approved stain sample 

Metal design need follow the requirement ,structure must stable ,color must match the approved stain sample .Metal thickness must enough 1.5MM;

Drawer & door panel ,wood veneer grain must keep the same ,can replace with each other ;

if have any damage ,overpainting ,bubble ,mispainting or other beauty defects ; 

Wood veneer can't show color different ,drawer box and the cabinet body color must match ;

Safety test ,product if have any sharp edge ,closed angel ,scrape hand ( product stability ,compression capactity ,Anti-dumping ability,surge withstand capability);

Combination products color need match ;

The inside and outside of the product should be clean without dust, wood chip, paint pollution and so on.

B-  Function and structure 

Test assemble before package ;

Test the structure ,must confirm the structure stable before package  ,if need add nail or glue or wood block J-rail to strength the structure ;

Drawer glide testing ,must smoothy .open or close the door panel need smoothy and no noise ,same product metal color need same ,drawer glide and hinge must follow approved shop drawing ;

K/D product must test install ,and provide assembly instruction .test basic function ,structure if reasonable ,confirm all size correct ;

Produt with refidgerator and microwave need desinger provide correct recess size ,we must confirm they can put into the product ,need cut out the vent hole follow the shop drawing ;

Top panel must flush ,can not curve or inset ;

Combined cabinet ,fixed with bolts ,must check the hole place use model ,ensure the glue dry during installation ;

Product with led ligting ,must test before package ;

Inspecr quartz top and glass top ,must use model to check the clearance ;

Product with groove ,the shadow line painted correctly;

C- Appearance checking 

Drawer glide testing ,must smoothy .open or close the door panel need smoothy and no noise ,same product metal color need same ,drawer glide and hinge must follow approved shop drawing ;

K/D product must test install ,and provide assembly instruction .test basic function ,structure if reasonable ,confirm all size correct ;

Solid wood  all kinds of bad points, check whether the material is correctdemand no wormholes, decadent, dead section, mark, kerf, burrs, deformation, etc all kinds of bad points, check whether the material is correct ;

Product with solidwood edge ,solid wood can not have scab . can not use the wood veneer darker than approved stain sample .

D-Packing

Carton materils must follow our requirement ( small product 160-200LBS,casegoods over 200LBS);

Carton front & side shipping mark must correct ,clear,Marking should show:Project Name ,Product name ,product code ,product dimensions ,weight ,carton no.....

If the bootom of product is flush ,and not heavy ,not need use protection frame ,but must add hard corner protection . if the product is too heavy  ,flush bottom need use protection frame . if bottom is open ,bottom need finsh to prevent mildew;

While packing the withe products ,workers need with white gloves ,and clean up the working table ,prevent from polluting ;

Clean the products before package ,make sure the hardware and assemble instruction correct ,if missed the accessories . seating need put drier inside ;

quartz top and glass need packed spreately ,and packed in wood box  ,can not install with the base , except the special requiremwnt . but must make sure it is safe enough .

All of these manufacturing consequences will affect your guests as well. Faulty furniture can be dangerous, and the sheer amount of wear is more likely to bring out any defects very quickly.

Quality control processes help address these issues before they reach you and your guests. If your vendor isn't dedicated to strict quality control, your guests are ultimately the ones who suffer ,so you must cooperate with a professional furniture manufacturer ,if you have any concern about your quality during production ,you can contract rainbow team ,then can supply best service & quality for you .